TR4101 Proximity Loop-powered Transmitter for Shaft Vibration
Brand: PROVIBTECH
TR4101-A04-E07-G00-S00is a radial shaft vibration two-wire loop powered transmitter.
The TR4101 is a cost-effective solution for monitoring the radial vibration of shafts in balance of plant machines.
The TR4101 integrates a proximity probe driver and a signal conditioning circuit into a single package. It works together with a proximity probe and an extension cable to form a complete system.
Features:
- Loop powered transmitter
- Does not require proximity probe driver
- Buffered output/ GAP
- Compatible with other manufacturers’ proximity probes (5mm, 8mm and 11mm)
- Aluminum cast case (copper free) with epoxy
- potting for better environmental protection and reliability
- Same size as a proximity probe driver
Specifications
Physical
Height: 75mm
Weight: 0.5 kg (1.0 lb)
Environmental
Temperature
Operation: -40℃ to +70℃
Storage: -40℃ to +100℃
Humidity:
90% non-condensing
Electrical
Power Supply: 16-30VDC
Frequency Response (±3dB): 2.0 - 3,000Hz
Probe and Cable:
5 meter or 9 meter proximity probe and extension cable
works with 5mm, 8mm, and 11mm probes
Proximity probe includes: TM0180, TM0105, TM0110, 3300, 7200 and 990 series
Sensor Linear Range (reference with AISI 4140 steel):
5mm, 8mm probe: 2.0 mm (80mil)
Approximately 0.25mm (10mil) to 2.25mm (90mil)
11mm probe: 4.0mm (160mil)
Approximately 0.4mm (15mil) to 4.4mm (175mil)
Overall Vibration:
4-20mA
2-wire, load
Buffered Output/ GAP:
Original vibration, un-filtered
Nominal: 2-18VDC
Impedance: 20 kΩ
Maximum cable distance: 3.0m (10ft)
Sensitivity: 8.0mV/um (200mV/mil) nominal
Maximum Load: 50×(Vs-16)
More models are available below:
TR4101-AXX-EXX-GXX-SXX
AXX:Full Scale
A00:0-200um(8.0mil)pk-pk
A01:0-500um(20mil)pk-pk
A02:0-100um(4.0mil)pk-pk
A03:0-250um(10mil)pk-pk
A04:0-630um(25mil)pk-pk
A05:0-125um(5.0mil)pk-pk
EXX:Probe and Cable(not included)
E00*:TM0180,8mm Probe,5m Cable
E01:TM0180,8mm Probe,9m Cable
E02:3300,8mm Probe,5m Cable
E03:3300,8mm Probe,9m Cable
E04:7200,8mm Probe,5m Cable
E05:7200,8mm Probe,9m Cable
E06:TM0105,5mm Probe,5m Cable
E07:TM0105,5mm Probe,9m Cable
E08:TM0110,11mm Probe,5m Cable
E09:TM0110,11mm Probe,9m Cable
E10:3300,11mm Probe,5m Cable
E11:3300,11mm Probe,9m Cable
E12:7200,11mm Probe,5m Cable
E13:7200,11mm Probe,9m Cable
E14:3309 Probe,5m Cable
E15:3309 Probe,7m Cable
GXX:Mount
G00*:DIN rail mount
G01:Plate mount
SXX:Hazardous Area
S00:Without approval.CE
S01:Multiple approvals
Please fill out following form and we will get back to you.